How To Install A Security Camera With A Motion Sensor
Security cameras with motion sensors automatically begin filming when they sense movement and stop when that motion ceases. This feature can save time when reviewing recorded footage, since you won’t have to sift through hours of empty footage. The installation process varies depending on whether your security camera is wireless or not.
Instructions
Things You’ll Need:
Motion sensor camera
Receiver
1.Step 1
Select the location where you want to install your security camera.
2.Step 2
Keep in mind that the motion sensor will detect all movement, so make sure branches from trees and bushes will not trigger the camera.
3.Step 3
Mount the camera in the spot you have selected.
4.Step 4
Attach wires, if required, to the camera.
5.Step 5
Set up the receiver you will be using, whether it’s a TV, VCR, monitor or computer.
6.Step 6
Test the motion sensor security camera to make sure it is working properly.
Tips & Warnings
If the location for your motion sensor security camera is obstructed by trees or bushes, you may want to do some landscaping. If your entrances are unlighted, you may also want to consider installing lights with a motion sensor when you install your security camera, which will not only make coming home more convenient, but can also scare off potential burglars who dont want to be seen.
How to Install a Video Surveillance Camera in a Home Office
Summary: steps for the installation of a video surveillance camera
You can purchase a video surveillance camera to protect the sanctity of your office. Follow these steps to install it.
Instructions
1.Step 1
Decide in which room you will be installing the camera.
2.Step 2
Decide the best angle for the camera.
3.Step 3
Decide how high off the floor you want the camera.
4.Step 4
Find the mounting bracket that came with the camera.
5.Step 5
Hold the mounting bracket in place with one hand and use a pencil to mark the screw holes with the other hand.
6.Step 6
Determine if the screw holes will be in a stud. Use a stud finder from a home improvement store if necessary.
7.Step 7
If you will not be screwing the screws into a stud, you will need to use drywall anchor bolt
8.Step 8
Use a drill bit that is slightly smaller than the screw you will use to mount the bracket.
9.Step 9
Predrill a hole into the stud or insert the drywall anchor bolt into the drywall.
10.Step 10
Hold the mounting bracket in place and insert the screws into the predrilled holes or the drywall anchor bolt.
11.Step 11
Place the camera onto the mounting bracket.
12.Step 12
Plug the camera into the outlet.
13.Step 13
Sync the camera to the base station following the manufacturer’s directions.
Chinese police to expand rural surveillance camera network
Upgrade for DVLA’s CCTV
Marshall introduces new high-definition IP camera